SWK 200 CSO
The SWK CSO series is a series of inverter equipment of reduced weight and with the possibility to weld with electrode and TIG Lift. They are designed to work with generators avoiding failures derived from voltage peaks.
Its high open circuit voltage allows them to work with cellulosic electrode and achieve a perfect electrode start in any working condition.
They have functions such as ARC Force, Anti-sticking and Hot start and are equipped with voltage, current and temperature sensors for the self-protection of the equipment.
- TIG Mode – Welding capacity with Lift TIG mode
- Additional functions – Incorporates Hot Start, Anti-sticking and Arc Force functions
- Protections – Equipped with temperature sensors, protection by phase loss, voltage and current for a high self-protection of the equipment
- Digital display – Control of amperage and voltage simultaneously through digital panel
- Weight – Lightweight and versatile equipment
- Use with current generator – Designed to absorb voltage pikes and work safely with generator power.
- High no load voltage.
Related products
-
WK SAW 1250
The WK saw series are high efficiency submerged arc welding equipment with a reduced weight and dimensions, with inverter technology and a 100% duty cycle.
The digital control of the welding parameters is available both from the power source and from the tractor module. Possibility of selection of arc air function.
Equipped with self-diagnostic system and digital communication between the source and the tractor module, they have self-protection systems through overheating and short circuits.
-
WK 500 PULSE
The WK Pulse series are synergic devices with pulsed and double-pulsed MIG-MAG technology, in versions of 400 and 500 amps. Pulsed technology allows remarkable advantages in the welding of different material types and thicknesses. The precision and reliability of Weldkor WK Pulse equipment has proved to be one of the highest performance solutions.
-
TWK 320 AC/DC PULSE – TWK 400 AC/DC PULSE
The WK AC / DC TIG units offer high performance in alternating current welding. They have the possibility of multiple waveform selection in the output current, from a square, sinusoidal or triangular wave format. The AC balance control (50 ~ 85%) monitors the aluminum oxide and helps in better cleaning during welding. They are prepared for high working regimes due to their high duty cycle and are equipped with voltage, current and temperature sensors for self-protection of the equipment
