ITR 308LSI
ITR 308LSI is a 20 Cr / 10 Ni stainless steel TIG welding wire similar in composition to ER 308LSI, suitable for welding of austenitic stainless steels such as 18 Cr/ 8 Ni type, AISI 304, 304L and 308LSI type of steels. Excellent corrosion resistance and good mechanical properties.
Ferrite is controlled between 5% to 10 %. Silicon – 0.85 % approx content improves weldability and bead appearance. Extra low carbon increases inter-granular corrosion resistance. Excellent crack resistance.
Related products
-
SFA T-50
Flux cored wire for all positions with excellent weldability characteristics. The SFA-T50 leaves a welding bead perfectly flat and with low spatter level. Designed for single-pass or multi-pass, the slag is easily removed and is prepared for use with Ar / CO2 (20-25%) or CO2 gas. It has excellent results in low temperature impact tests.
It is a flux cored wire of great efficiency thanks to its high deposition rate.
Extremely versatile for a wide variety of applications, such as shipbuilding, storage tanks, bridges and general fabrication of structural steels.
-
ITR 309L
ITR 309L is a stainless TIG rod conforming to ER 309L for welding austenitic stainless steels such as AISI 309.
-
SC 307
Austenitic (non-magnetic) rutile coated electrode for joining and overlaying on manganese steels(up to 14% Mn) and high sulphur and phosphorus containing steels
