SFA 308LSI
SFA 308LSI is an extra low carbon 20 Cr/ 9 Ni stainless steel filler wire suitable for MIG welding of austenitic stainless steels such as 18 Cr /8 Ni type, AISI 301, 302, 304, 304L, 308 and 308L type of steels.
Excellent corrosion resistance and good mechanical properties. Ferrite is controlled between 5-10%.Si~0.80 content improves weldability and bead appearance.
Related products
-
SC NiFe
Graphite basic coated electrode with a Ferro-Nickel alloy deposit for joining and repairing nodular cast iron. Deposit homogeneous and highly resistant against cracks. Particularly recommended for dissimilar welding of cast iron to steels and constructions of cast iron.
-
SC 6010
Cellulosic coated deep penetration electrode for welding of pipes and pipelines in all positions using conventional and stove pipe techniques.
-
SFA T-50
Flux cored wire for all positions with excellent weldability characteristics. The SFA-T50 leaves a welding bead perfectly flat and with low spatter level. Designed for single-pass or multi-pass, the slag is easily removed and is prepared for use with Ar / CO2 (20-25%) or CO2 gas. It has excellent results in low temperature impact tests.
It is a flux cored wire of great efficiency thanks to its high deposition rate.
Extremely versatile for a wide variety of applications, such as shipbuilding, storage tanks, bridges and general fabrication of structural steels.
