SWK 320
SWK CSO is a series of inverter light-weight equipment and capable of electrode welding and TIG by contact. They are designed to work with generators avoiding failures derived from voltage peaks.
Their high vacuum tension allows them to work with cellulosic electrode and achieve a perfect priming of the electrode in any working condition.
They have functions like ARC Force, Anti-sticking and Hot start and are equipped with voltage, current and temperature for self-protection of the equipment.
- Tig Mode – Lift Tig mode welding capability
- Additional functions – Incorporates Hot Start, Anti-sticking, adjustable Arc Force and VRD
- Protection – Equipped with temperature sensors, protection for loss of phase, voltage and current for high self-protection.
- Digital screen – Control of amperage and voltage simultaneously by digital panel
- Weight – Versatile and light.
- Use with current generator – Designed to absorb voltage peaks and work safely on generator power.High vacuum voltage
Download manual
Download technical sheet
Related products
-
WK SAW 1250
The WK saw series are high efficiency submerged arc welding equipment with a reduced weight and dimensions, with inverter technology and a 100% duty cycle.
The digital control of the welding parameters is available both from the power source and from the tractor module. Possibility of selection of arc air function.
Equipped with self-diagnostic system and digital communication between the source and the tractor module, they have self-protection systems through overheating and short circuits.
-
SWK 180 – SWK 200
The equipment of the SWK series is specially designed for electrode welding. They are very light equipment and with the possibility to weld TIG Lift, they are also designed to work with generators avoiding possible failures due to voltage peaks.
They have functions such as ARC Force, Anti-sticking and Hot start and are equipped with voltage, current and temperature sensors for the self-protection of the equipment.
The SWK series offers the welder a perfect regulation of the welding parameters and allows him to work comfortably and safely thanks to the reduced weight of the equipment.
-
TWK 320 AC/DC PULSE – TWK 400 AC/DC PULSE
The WK AC / DC TIG units offer high performance in alternating current welding. They have the possibility of multiple waveform selection in the output current, from a square, sinusoidal or triangular wave format. The AC balance control (50 ~ 85%) monitors the aluminum oxide and helps in better cleaning during welding. They are prepared for high working regimes due to their high duty cycle and are equipped with voltage, current and temperature sensors for self-protection of the equipment
