-
SFA 316LSI
SFA 316LSI is a G 19 12 3 LSi/ER 316LSi type solid MAG welding wire, supplied precision layer wound, depositing a low C-19Cr12Ni2.5Mo weld metal. Suitable for use with Ar+2%O2 or Ar+0.5…5%CO2 mixed shielding gases.
-
SFA M70
SFA M70 is a metal cored wire which combines the high deposition rates of FCW and the high efficiencies of a solid wire.
-
SFA T-50
Flux cored wire for all positions with excellent weldability characteristics. The SFA-T50 leaves a welding bead perfectly flat and with low spatter level. Designed for single-pass or multi-pass, the slag is easily removed and is prepared for use with Ar / CO2 (20-25%) or CO2 gas. It has excellent results in low temperature impact tests.
It is a flux cored wire of great efficiency thanks to its high deposition rate.
Extremely versatile for a wide variety of applications, such as shipbuilding, storage tanks, bridges and general fabrication of structural steels.
-
SFA T-50
SFA T-50 is a tubular wire designed for welding in all position in mono-passed and multi-passed. Uses CO2 or gas mixture 20% – 25% CO2 + Ar as protective gases
-
SG-30F
For each type of welded joint, WK offers an automated solution and the SG-30F is a good example of this. It is a magnetic welding carriage that nevertheless has a flexible guide that can adapt perfectly to any contour of the work piece. The fixing of this guide is done by magnets with ON / OFF device which greatly facilitates the work of assembly and disassembly of the guides. The carriage has an oscillator with multiple adjustable modes.
-
SG-40F
The SG-40F is a digital version of the SG-30F, has the same characteristics of the SG-30F but its control is carried out by means of a digital panel which allows a reduction in the size and weight of the carriage
-
SG-50R
The welding carriage SG-50R is an automation system with aluminum rail which is fixed by ON / OFF magnets. The welding carriage has a transverse oscillator with a total adjustment of the oscillation parameters (amplitude, speed, type, time of stops, etc).
For the SG-50R it is possible to use instead of the rigid aluminum rail, a flexible guide rail that allows its adaptation to the contour of the work piece.
-
SR-1
The SR-11DS is a welding carriage designed for welding on both sides simultaneously. It has a support arm for the second torch that can be adjusted in height and width which allows its adaptation to several reinforcement measures in a simple way.
-
SR-11DS
The SR-11DS is a welding carriage designed for welding on both sides simultaneously. It has a support arm for the second torch that can be adjusted in height and width which allows its adaptation to several reinforcement measures in a simple way.
-
SR-11T
When it is required to give multi-pass in fillet welding, the SR-11T is the best option since it has a double torch system in tandem that makes it possible to give two beads on one side of the reinforcement simultaneously.
-
SR-2
The SR-2 is a magnetic welding carriage for flat fillet welding. It is a compact and lightweight equipment that also allows a range of total regulation in the inclination of the torch, this enables the operator to perform welding in areas where the access of the torch is more limited because it can be obtained practically any angle of incidence thanks to the triple regulation available.
-
SV-10 B
It is a magnetic welding carriage with oscillation mode. The SV-10B has a pendular oscillator with multiple regulation modes for perfect control of the welding. In the SV-10B you can set stop times, oscillation speeds, oscillation types, amplitude, etc
The SV-10B has rechargeable battery power with a range of 8 hours which eliminates the need for power cables in the work area.
