-
SWK 180 – SWK 200
The equipment of the SWK series is specially designed for electrode welding. They are very light equipment and with the possibility to weld TIG Lift, they are also designed to work with generators avoiding possible failures due to voltage peaks.
They have functions such as ARC Force, Anti-sticking and Hot start and are equipped with voltage, current and temperature sensors for the self-protection of the equipment.
The SWK series offers the welder a perfect regulation of the welding parameters and allows him to work comfortably and safely thanks to the reduced weight of the equipment.
-
SWK 200 CSO
The SWK CSO series is a series of inverter equipment of reduced weight and with the possibility to weld with electrode and TIG Lift. They are designed to work with generators avoiding failures derived from voltage peaks.
Its high open circuit voltage allows them to work with cellulosic electrode and achieve a perfect electrode start in any working condition.
They have functions such as ARC Force, Anti-sticking and Hot start and are equipped with voltage, current and temperature sensors for the self-protection of the equipment.
-
SWK 250
SWK series equipment is specially designed for electrode welding.
Lightweight and with capacity for contact Tig welding, they are also designed to work with generators avoiding possible failures due to voltaje peaks.
-
SWK 320
SWK CSO is a series of inverter light-weight equipment and capable of electrode welding and TIG by contact. They are designed to work with generators avoiding failures derived from voltage peaks.
Their high vacuum tension allows them to work with cellulosic electrode and achieve a perfect priming of the electrode in any working condition.They have functions like ARC Force, Anti-sticking and Hot start and are equipped with voltage, current and temperature for self-protection of the equipment.
-
SWK 400 CSO
The SWK CSO series is a series of inverter equipment of reduced weight and with the possibility to weld with electrode and TIG Lift. They are designed to work with generators avoiding failures derived from voltage peaks.
Its high open circuit voltage allows them to work with cellulosic electrode and achieve a perfect electrode start in any working condition.
They have functions such as ARC Force, Anti-sticking and Hot start and are equipped with voltage, current and temperature sensors for the self-protection of the equipment.
-
TWK 200
The TWK series are equipment designed for TIG welding. They have high-frequency arc and the possibility of selecting Up / Down mode. Welding mode in 2T / 4T. They have the possibility to weld with Electrode, TIG Lift and TIG HF.
They are inverter generators with superior arc dynamics and high welding performance.
With the possibility of being connected to power generators thanks to the equipment protection sensors that avoid possible failures derived from voltage peaks.
-
TWK 200 AC/DC PULSE
The WK AC / DC TIG units offer high performance in AC current welding. The AC balance control (50 ~ 85%) monitors the aluminum oxide and helps in better cleaning during welding. They are prepared for high working regimes due to their high running factor and are equipped with voltage, current and temperature sensors for self-protection of the equipment
-
TWK 200 PULSE – TWK 250 PULSE
The TWK Pulse series gives the welder all the advantages of WK TIG technology, including the pulsed current mode that allows welding on thin materials with little or no deformation while providing a perfect weld aesthetic.
-
TWK 320 AC/DC PULSE – TWK 400 AC/DC PULSE
The WK AC / DC TIG units offer high performance in alternating current welding. They have the possibility of multiple waveform selection in the output current, from a square, sinusoidal or triangular wave format. The AC balance control (50 ~ 85%) monitors the aluminum oxide and helps in better cleaning during welding. They are prepared for high working regimes due to their high duty cycle and are equipped with voltage, current and temperature sensors for self-protection of the equipment
-
TWK 320 PULSE
The TWK Pulse series gives the welder all the advantages of Weldkor TIG technology, including the pulsed current mode that allows welding on thin materials with little or no deformation while providing a perfect weld aesthetic.
-
VEKTOR R60
The Vektor R60 automatic filter screen uses the latest auto-darkening filter technology (ADF). With 4 arc sensors and a 100×60 screen it provides the welder with an optimal viewing area.
-
WCM 150
The WCM series of air cooled MIG MAG torches provide the welder with great versatility and
ergonomics.They are designed to stand highly demanding work regimes. They have a rotation point at the base of the grip for increased durability of the torch.
