ITR 309L
ITR 309L is a stainless TIG rod conforming to ER 309L for welding austenitic stainless steels such as AISI 309.
It is also used to weld dissimilar steels and for buffer layers and buttering 18 Cr/ 8 Ni steels. Excellent oxidation and corrosion resistance in continuous service up to 1100ºC. Ferrite content is 15% approx.
Related products
-
SFA T-50
Flux cored wire for all positions with excellent weldability characteristics. The SFA-T50 leaves a welding bead perfectly flat and with low spatter level. Designed for single-pass or multi-pass, the slag is easily removed and is prepared for use with Ar / CO2 (20-25%) or CO2 gas. It has excellent results in low temperature impact tests.
It is a flux cored wire of great efficiency thanks to its high deposition rate.
Extremely versatile for a wide variety of applications, such as shipbuilding, storage tanks, bridges and general fabrication of structural steels.
-
ITR 308L
ITR 308L is a 20 Cr / 10 Ni stainless steel TIG welding wire similar in composition to ER 308L, suitable for welding of austenitic stainless steels such as 18 Cr/ 8 Ni type, AISI 304, 304L, 308 and 308L type of steels.
-
SC 307
Austenitic (non-magnetic) rutile coated electrode for joining and overlaying on manganese steels(up to 14% Mn) and high sulphur and phosphorus containing steels