SFA 307
SFA 307 is a G 18 8 Mn/ER 307 (similar) type solid MAG welding wire, supplied precision layer wound, depositing a C-18Cr8Ni6Mn weld metal. Suitable for use with Ar+2%O2 or Ar+0.5…5%CO2 mixed shielding gases.
SFA 307 is suitable for welding dissimilar steels between unalloyed steels, austenitic stainless steels or heat resisting steels, also used for welding of hardening and tempering steels, such as ballistic steels.
Related products
-
SFA T-50
Flux cored wire for all positions with excellent weldability characteristics. The SFA-T50 leaves a welding bead perfectly flat and with low spatter level. Designed for single-pass or multi-pass, the slag is easily removed and is prepared for use with Ar / CO2 (20-25%) or CO2 gas. It has excellent results in low temperature impact tests.
It is a flux cored wire of great efficiency thanks to its high deposition rate.
Extremely versatile for a wide variety of applications, such as shipbuilding, storage tanks, bridges and general fabrication of structural steels.
-
SC NiFe
Graphite basic coated electrode with a Ferro-Nickel alloy deposit for joining and repairing nodular cast iron. Deposit homogeneous and highly resistant against cracks. Particularly recommended for dissimilar welding of cast iron to steels and constructions of cast iron.
-
SC 307
Austenitic (non-magnetic) rutile coated electrode for joining and overlaying on manganese steels(up to 14% Mn) and high sulphur and phosphorus containing steels
