SFA T-50
Flux cored wire for all positions with excellent weldability characteristics. The SFA-T50 leaves a welding bead perfectly flat and with low spatter level. Designed for single-pass or multi-pass, the slag is easily removed and is prepared for use with Ar / CO2 (20-25%) or CO2 gas. It has excellent results in low temperature impact tests.
It is a flux cored wire of great efficiency thanks to its high deposition rate.
Extremely versatile for a wide variety of applications, such as shipbuilding, storage tanks, bridges and general fabrication of structural steels.
Flux cored wire for all positions with excellent weldability characteristics. The SFA-T50 leaves a welding bead perfectly flat and with low spatter level.
Related products
-
ITR 308LSI
ITR 308LSI is a 20 Cr / 10 Ni stainless steel TIG welding wire similar in composition to ER 308LSI, suitable for welding of austenitic stainless steels such as 18 Cr/ 8 Ni type, AISI 304, 304L and 308LSI type of steels. Excellent corrosion resistance and good mechanical properties.
-
SFA 100
It is a low alloy steel wire, coated with copper, for MIG / MAG (GMAW) welding of high strength steel that requires, for critical applications, a tenacious welding metal. It is also suitable for the welding of steels to which a high resistance to impact at low temperatures is required. The SFA-100 normally uses gas mixture M21 – M33 and CO2 as a shield gas.
-
ITR 308L
ITR 308L is a 20 Cr / 10 Ni stainless steel TIG welding wire similar in composition to ER 308L, suitable for welding of austenitic stainless steels such as 18 Cr/ 8 Ni type, AISI 304, 304L, 308 and 308L type of steels.
