SFA 316LSI
SFA 316LSI is a G 19 12 3 LSi/ER 316LSi type solid MAG welding wire, supplied precision layer wound, depositing a low C-19Cr12Ni2.5Mo weld metal. Suitable for use with Ar+2%O2 or Ar+0.5…5%CO2 mixed shielding gases.
SFA 316LSI is used for welding of 316 and 316L grade stainless steels, in a wide range of applications including the fabrication of pipe and plate.
Related products
-
SFA 1
Solid wire SG2 indicated for MIG / MAG wire for welded mechanical constructions in general.
For welding of steels up to 530N / mm2 of minimum tensile strength.
Winding layer by layer.
It uses CO2 or Argon / CO2 mixtures as protective gas.
The welding current to be welded will always be DC current (+). -
SFA T-50
Flux cored wire for all positions with excellent weldability characteristics. The SFA-T50 leaves a welding bead perfectly flat and with low spatter level. Designed for single-pass or multi-pass, the slag is easily removed and is prepared for use with Ar / CO2 (20-25%) or CO2 gas. It has excellent results in low temperature impact tests.
It is a flux cored wire of great efficiency thanks to its high deposition rate.
Extremely versatile for a wide variety of applications, such as shipbuilding, storage tanks, bridges and general fabrication of structural steels.
-
SC 6010
Cellulosic coated deep penetration electrode for welding of pipes and pipelines in all positions using conventional and stove pipe techniques.
