SFA 100
It is a low alloy steel wire, coated with copper, for MIG / MAG (GMAW) welding of high strength steel that requires, for critical applications, a tenacious welding metal. It is also suitable for the welding of steels to which a high resistance to impact at low temperatures is required. The SFA-100 normally uses gas mixture M21 – M33 and CO2 as a shield gas.
It is a low alloy steel wire, coated with copper, for MIG / MAG (GMAW) welding of high strength steel that requires, for critical applications, a tenacious welding metal.
Download technical sheet
Related products
-
SFA T-50
Flux cored wire for all positions with excellent weldability characteristics. The SFA-T50 leaves a welding bead perfectly flat and with low spatter level. Designed for single-pass or multi-pass, the slag is easily removed and is prepared for use with Ar / CO2 (20-25%) or CO2 gas. It has excellent results in low temperature impact tests.
It is a flux cored wire of great efficiency thanks to its high deposition rate.
Extremely versatile for a wide variety of applications, such as shipbuilding, storage tanks, bridges and general fabrication of structural steels.
-
SC 308L-16
Low carbon Rutile-basic-coated 19Cr, 10Ni austenitic stainless steel electrode with controlled ferrite approx 8% for maximum resistance to cracking and corrosion. Core wire is 308LER with controlled ‘P’ & ‘S’.
-
SC 7016
Basic coated, low hydrogen electrode for producing tough and crack-free welded joints. Good operating characteristics when positional welding.
