SFA T-50
Flux cored wire for all positions with excellent weldability characteristics. The SFA-T50 leaves a welding bead perfectly flat and with low spatter level. Designed for single-pass or multi-pass, the slag is easily removed and is prepared for use with Ar / CO2 (20-25%) or CO2 gas. It has excellent results in low temperature impact tests.
It is a flux cored wire of great efficiency thanks to its high deposition rate.
Extremely versatile for a wide variety of applications, such as shipbuilding, storage tanks, bridges and general fabrication of structural steels.
Flux cored wire for all positions with excellent weldability characteristics. The SFA-T50 leaves a welding bead perfectly flat and with low spatter level.
Related products
-
SFA 1
Solid wire SG2 indicated for MIG / MAG wire for welded mechanical constructions in general.
For welding of steels up to 530N / mm2 of minimum tensile strength.
Winding layer by layer.
It uses CO2 or Argon / CO2 mixtures as protective gas.
The welding current to be welded will always be DC current (+). -
ITR 308LSI
ITR 308LSI is a 20 Cr / 10 Ni stainless steel TIG welding wire similar in composition to ER 308LSI, suitable for welding of austenitic stainless steels such as 18 Cr/ 8 Ni type, AISI 304, 304L and 308LSI type of steels. Excellent corrosion resistance and good mechanical properties.
-
ITR 310
ITR 310 is a stainless TIG rod conforming to ER 310 with 25% Cr and 20% Ni.
