TWK 200
The TWK series are equipment designed for TIG welding. They have high-frequency arc and the possibility of selecting Up / Down mode. Welding mode in 2T / 4T. They have the possibility to weld with Electrode, TIG Lift and TIG HF.
They are inverter generators with superior arc dynamics and high welding performance.
With the possibility of being connected to power generators thanks to the equipment protection sensors that avoid possible failures derived from voltage peaks.
- HF mode – High Frequency Tig
- Slope – Adjustable slope time
- Post Gas – Adjustable post-gas time
- 2T / 4T mode – 2T / 4T mode selection. Possibility of up and down slope adjustable from the torch.
- Protections – Equipped with temperature, voltage and current sensors for greater self-protection of the equipment
- Use with power generator – Designed to work with generator power.
- Weight – Extremely lightweight and versatile equipment.
Related products
-
SWK 320
SWK CSO is a series of inverter light-weight equipment and capable of electrode welding and TIG by contact. They are designed to work with generators avoiding failures derived from voltage peaks.
Their high vacuum tension allows them to work with cellulosic electrode and achieve a perfect priming of the electrode in any working condition.They have functions like ARC Force, Anti-sticking and Hot start and are equipped with voltage, current and temperature for self-protection of the equipment.
-
TWK 320 AC/DC PULSE – TWK 400 AC/DC PULSE
The WK AC / DC TIG units offer high performance in alternating current welding. They have the possibility of multiple waveform selection in the output current, from a square, sinusoidal or triangular wave format. The AC balance control (50 ~ 85%) monitors the aluminum oxide and helps in better cleaning during welding. They are prepared for high working regimes due to their high duty cycle and are equipped with voltage, current and temperature sensors for self-protection of the equipment
-
PW-65 CNC
PW plasma cutting equipment are very user-friendly and allow several types of materials to be cut (Aluminum, Carbon steel, Stainless steel and copper. The pilot arc increases the cutting capacity and the speed as well as consumables useful life.
